IEC60068-2-78 Programmable Constant Temperature & Humidity Test Chamber 4.5m³
Complied Standards & Clauses
It conforms to standards:
IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”
IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”
IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”
IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”
Product Overview
This test chamber simulates the temperature and humidity changeable environment for the products or materials. It is widely used in the adaptability test of electrical, electronics, instrument and meter and other product parts under high and low temperature and humid environment during storage, transportation and usage, to determine the temperature adaptability of the above products or materials to high and low temperature and humid environment, especially for product electrification changes in performance and mechanical properties.
Technical Parameters
| No. | Project | Content |
| A | Product number | SN881C-4.5m³ |
| B | Product brand | SINUO |
| C | Chamber inner size | 1500mm*1500mm*2000mm(W*D*H) |
| External chamber Dimensions | Cabinet part: about 1980mm*2420 mm*2450 mm(W*D*H) |
| D | Temperature range | +20℃→+50℃ |
| Heating rate | ≥2～3℃/min (average over the whole process, no load) |
| Cooling rate | ≥0.7～1℃/min (average over the whole process, no load) |
| Temperature display resolution | 0.1℃ |
| Temperature fluctuation | ±0.5℃ | Data measured under no-load conditions |
| Temperature deviation | ±2.0℃ |
| Humidity range | 20%RH～98%RH |
| Humidity fluctuation | ±2.5%RH |
| Humidity deviation | ±3.0%R.H |
| Temperature and humidity control capability range chart | 
(Refer to the temperature and humidity controllable range chart, no moisture source or heat load) |
| E | Motor noise | ≤75dB (A) (Measured in a soundproof room with an ambient temperature of 25°C and low echo; A-weighting was used to test the average value of 9 points; each test point was 2 meters horizontally from the noise source and 1 meter high from the ground.) |
| F | Power Supply | AC3￠5W 380V 50Hz (R, STN three-phase five-wire plus ground wire) (voltage fluctuation ≤±10%) |
| G | Power | Overall 8KW |
Details
Product Tags:
|
|
IEC60068-2-78 Programmable Constant Temperature Humidity Test Chamber 4.5m3 Images
|
