Home > EVSE Testing Equipment >

Electric Vehicle Charging Pile Impulse Voltages Generator Tester

Product Categories

Electric Vehicle Testing Equipment [31]
EVSE Testing Equipment [26]
EV Connector Testing Equipment [87]
EV Battery Testing Equipment [49]
Walk In Environmental Test Chamber [31]
Environmental Test Chamber [52]
Temperature Humidity Test Chamber [26]
Water Ingress Testing Equipment [41]
Flammability Testing Equipment [20]
Electrical Safety Testing Equipment [25]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Electric Vehicle Charging Pile Impulse Voltages Generator Tester

Name: Electric Vehicle Charging Pile Impulse Voltages Generator Tester
Brand: Sinuo
Price: 1 USD

Quality Electric Vehicle Charging Pile Impulse Voltages Generator Tester for sale

Brand Name : Sinuo

Model Number : SN1104-20KV

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Price : Customized

Payment Terms : T/T

Supply Ability : 10 sets/month

Delivery Time : 20 days

Packaging Details : Plywood box

Complied Standard : IEC 60664-1

Complied Clause : Clause 6.2.2.1

DC High Voltage : 20kV (Max) ±5％

Internal Resistance : 2Ω ± 10%, 500Ω± 10%

Impact Cycles : 1 ~ 9999

Interval Time : 1 ~ 99s

Peak Voltage : 300V-20kV

Wavefront Time : 1.2 µs ± 30 %

Contact Now

Electric Vehicle Charging Pile Impulse Voltages Generator

Complied Standards & Clauses for Electric Vehicle Charging Pile Impulse Voltages Generator

The Impulse Test Generator conforms to the standard requirements of IEC 60664-1 clause 6.2.2.1, required by IEC 61851-1 clause 12.7 and IEC 61851-23 clause 11.4, etc.

It is used to verify that the appliances shall withstand the transient over-voltages to which they may be subjected. The impulse voltage test is a destructive test in which a breakdown occurs if the test specimen cannot withstand the applied voltage. When the sample breaks down, sparks and discharge sounds will be generated. The peak voltage of the instrument will drop significantly (close to zero) when it is no-load. When the same voltage is applied again, the above phenomenon will occur.

Technical Parameters for Electric Vehicle Charging Pile Impulse Voltages Generator

Model	SN1104-20KV
DC high voltage	20kV (Max) ±5％
Impulse voltage wave	Impulse wavefront time: 1.2 µs ± 30 %; Half value of after wave time: 50 µs ± 20 % Please note that the waveform should be checked on an external oscilloscope
Instrument internal resistance	2Ω ± 10%and 500Ω± 10%
Peak voltage: 300 V~ 20kV	300V-20kV, Low: 300 V~ 2,500V, High: 2,500 V~ 20kV
Impact interval time	1 ~ 99s can be preset
Impact cycles	1 ~ 9999
Polarity	Positive and negative
Working power source	Rated voltage: ~ 220V±10%, 50/60Hz
Use environment	Temperature: 15°C-35°C, relative humidity 10%-75%
Dimension	600mm×570mm×1500mm
Weight	90 KG

Electric Vehicle Charging Pile Impulse Voltages Generator Detail

Electric Vehicle Charging Pile Impulse Voltages Generator Tester

6kV open circuit voltage output waveform (1000:1)

Please note that the waveform should be checked on an external oscilloscope

Product Tags:

Charging Pile Impulse Voltages Generator Tester

Electric Vehicle Impulse Voltages Generator Tester

Electric Vehicle Charging Pile Impulse Voltages Generator Tester Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!